BLANK FED FORMING MACHINE MODEL PV10-5010
BLANK FED FORMING MACHINE MODEL PV10-5010
Hydraulic machine with two opposite forming planes and is suitable to produce pastry trays, disposable plates, etc. with a maximum depth of approximately 35mm.
The forming planes can be equipped with different moulds because the forming parameters are divided and can be adjusted individually for each machine side.
The machine is powered by die-cut cardboard (blanks) and can work (up to a die-cut of maximum dimensions 290x440mm or diameter 290mm) with 2 dies for each forming surface.
The feeding of the carton and the removal of the finished product are carried out without interrupting the production cycle of the machine which is controlled and managed by PLC.
The machine is also equipped with a programmable pre-heating system that allows you to have the system at the correct operating temperature without waiting for the start of the work.
The machine can be equipped with outputs for automatic stacking and counting of finished products.
